Product Introduction
-
Our Integrated Pressure and Temperature Transmitter, is a high-performance dual-parameter transmitter engineered for simultaneous pressure and temperature measurement.Constructed with durable stainless steel, the transmitter is built to withstand harsh industrial environments, corrosive media, and extreme temperatures.
-
This transmitter features an all-in-one design, integrating pressure sensing and temperature measurement functions into a compact unit, simplifying your system design and reducing installation costs. Advanced sensing technology and signal processing circuitry ensure long-term reliability and stable, accurate readings.
-
Featuring standardized output signals and a low-power design, the integrated pressure and temperature transmitter allows for effortless integration into a wide range of control and data acquisition systems. This versatile solution is ideal for demanding applications across industries such as oil and gas, chemical processing, power generation, and manufacturing.
Features
Dual-Parameter Synchronization
Measures pressure and temperature simultaneously in a single device, reducing installation points and costs.
01
Superior Measurement Performance
Use precision sensors and temperature compensation technology to ensure long-term measurement accuracy.
02
Extreme Environment Resilience
Constructed with robust stainless steel to reliably operate across a wide temperature range from -40℃ to 125℃.
03
Simplified System Integration
Features standardized outputs and low power consumption for effortless connection into any control system.
04
Specifications
| Operating Temperature Range | -40°C~125°C |
| Pressure Range | 0~10MPa…35MPa |
| Over Pressure | 1.5FS |
| Power Supply | 12V~32V DC |
| Pressure Output Signal | 4mA~20mA |
| Temperature Output | PT100 |
| Total Error | ±0.5%FS |
| Electrical Connection | Cable or Specified |
| Pressure Connection | M10×1 Male |
Application
Our Integrated Pressure and Temperature Transmitter is engineered for precision and durability across a wide spectrum of demanding industries. By delivering two critical measurements, it simplifies system design, enhances reliability, and significantly saving your costs.
Oil, Gas & Chemical Processing
In corrosive and safety-critical environments, our transmitters provide dual-parameter pressure and temperature data for oil wells, pipelines, and more, enabling precise process control and ensuring safe production.
Power Generation and Metallurgy
Applications include boiler pressure monitoring, superheater temperature and pressure control, cooling water system management, and the hydraulic systems of heavy metallurgical machinery.
Industrial Machinery and Manufacturing
This transmitter is ideal for monitoring clamping force and oil temperature in injection molding machines, maintaining pressure in hydraulic and pneumatic systems, and controlling lubrication circuits.
Aerospace and Aviation
Our Integrated Pressure and Temperature Transmitters are used for testing and monitoring jet engine systems, measuring fuel and hydraulic pressure/temperature, and environmental control systems within aircraft.
Marine and Offshore
Designed to withstand harsh saline environments, these Pressure/Temperature provide reliable dual-parameter data for shipboard systems such as engine monitoring, ballast water and fuel tank gauging, and critical subsea equipment on offshore platforms.
Kind Tips
1. Ensure Proper Installation for Measurement Integrity
Avoid introducing measurement errors by ensuring the pressure port is correctly aligned and connected without imposing mechanical stress on the sensor body. Mount the transmitter on a flat, rigid surface to prevent housing strain.
2. Guarantee Signal Stability with Correct Electrical Practices
Always use shielded cabling with proper grounding to protect the signal from electromagnetic interference (EMI). Keep cable runs as short as possible, secure connections to avoid pull-outs, and route wires away from moving parts or heat sources.
3. Protect Your Device from Harsh Environmental Factors
Select an installation location that minimizes exposure to extreme temperature fluctuations, constant vibration, and corrosive media. In demanding environments, implement a routine inspection schedule to proactively identify any potential issues.
4. Maintain Accuracy Through Periodic Checks
To ensure consistent precision over the product's lifespan, we recommend performing regular zero-point and span calibration checks according to your application's criticality. Clean the exterior only with a soft, dry cloth.
5. Prioritize Safety to Prevent Damage
Never exceed the specified maximum pressure rating, including protection against pressure spikes or water hammer. This will prevent irreversible damage to the sensor and ensure operational safety.
For detailed specifications and full instructions, please contact us and our technical support team will provide you with the most professional assistance.
FAQ
Q: What are the advantages of an integrated pressure and temperature transmitter compared to two separate devices?
A: The primary advantage is significant cost savings on installation, wiring, and space. Measures pressure and temperature simultaneously in a single device, reducing installation points and costs.
Q: How do you ensure accuracy for both parameters under extreme temperature conditions?
A: Our transmitters utilize advanced internal temperature compensation algorithms and signal processing circuitry to actively correct for the effects of ambient and process temperature changes on the pressure sensor, ensuring high accuracy throughout the entire operating range.
Q: What output signals are available? Can it be integrated with my existing PLC or control system?
A: We offer standardized analog and digital outputs, allowing for easy integration with virtually all industrial control and data acquisition systems.
Q: What is your lead time for standard and customized orders?
A: Standard models are usually in stock or have a short lead time (1-2 weeks). For custom specifications (range, connector, material), please contact our sales team for a specific quote and timeline.
Q: Do you provide technical support?
A: Our support doesn't end at the sale. We provide comprehensive technical support, including installation guidance, troubleshooting assistance, and application consulting. Our team of engineers is available to help you ensure the sensor integrates seamlessly into your system.
Hot Tags: integrated pressure and temperature transmitter, China integrated pressure and temperature transmitter manufacturers, suppliers, factory, Analog Output Submersible Level Transmitter, General Industrial Pressure Transmitter, High Presicion Pressure Transmitter, Piezoresistive Differential Pressure Transmitter, pressure transmitter, Sanitary Pressure Transmitter
