Product Introduction
-
The probe temperature sensor utilizes a high-precision platinum resistor or thermocouple chip, sealed with high-thermal-conductivity silicone grease and then re-potted with epoxy resin to ensure fast response and accurate readings. The probe is made of 316L stainless steel and featuring a laser-welded, roll-locked design between the body and cable, it offers exceptional resistance to corrosion, chemicals, moisture, and mechanical stress.
-
The probe temperature sensor undergoes rigorous thermal shock and aging tests before leaving the factory to ensure long-term stability and maintenance-free operation.
-
The probe temperature sensor is plug-and-play and easy to install, ready for plug-and-play installation, it is ideal for a wide range of applications including kitchen equipment, cold chain logistics, medical sterilization, chemical reactors, HVAC systems, and deep-water temperature measurement.
Features
High Precision Measurement
Delivers accurate and fast-response temperature readings across a wide range with premium sensing elements and high thermal conductivity silicone grease seal.
01
Superior Environmental Resistance
Built with stainless steel or titanium alloy and advanced sealing to withstand corrosion, vibration, and harsh industrial conditions.
02
Long-Term Reliability
Rigorously tested for durability under thermal and mechanical stress, ensuring extended service life with minimal maintenance.
03
Easy Installation & Use
Designed for plug-and-play operation without need for recalibration, reducing setup time and effort.
04
Specifications
|
Type |
Platinum resistors: pt100, pt1000, pt500, pt200 Thermocouples: K/J/N/E/S/T/R/B Thermistors: 5K, 10K, 100K, 50K, 2.2K DS18B20 |
|
Accuracy |
Platinum Resistors: Class A, B, 1/3B Thermocouples: Class I, II Thermistors: 1%, 2%, 3% DS18B20: none |
|
Temperature Range |
Platinum resistance: -200°C to 850°C Thermocouple: -280°C to 1820°C Thermistor: -50°C to 300°C DS18B20: -55°C to 125°C |
|
Connection |
Platinum resistors: two-wire, three-wire, four-wire Thermocouples: none Thermistors: none DS18B20: none |
|
Sheath Diameter (mm) |
2, 3, 4, 5, 6, 8, 10.... .20 or specified |
|
Sheath Length (mm) |
10~2000 or specified |
|
Process Connection |
Flange |
Application
Food & Beverage Processing
Widely used for temperature monitoring in cooking, baking, chilling, and pasteurization processes; ideal for measuring core food temperature in ovens, fryers, refrigerators, and food storage units.
Industrial Process Monitoring
This probe temperature sensor is suitable for temperature tracking in chemical reactors, injection molding machines, extruders, industrial boilers, and fuel tanks.
Laboratory & Testing Environments
Applied in R&D and quality control for accurate temperature measurement of liquid and solid samples in environmental chambers, incubators, and experimental setups.
Home Appliance Integration
Embedded in smart appliances including rice cookers, coffee machines, water heaters, and sterilizers for precise thermal management and user safety.
Medical & Sterilization Equipment
Used in autoclaves, laboratory sterilizers, medical dryers, and disinfection cabinets to monitor and control temperatures accurately during sterilization cycles.
Kind Tips
-
Electrical Connection:
When connecting, align the keyway, push in, and tighten until securely in place.
When disconnecting, loosen the locking ring first, then gently pull the plug.
-
Material Selection: Select appropriate materials based on the corrosiveness of the media and the temperature.
-
Safe Operation: Do not use the sensor at excessive temperatures or pressures to prevent damage.
-
Disassembly: Always disconnect the electrical connections first.
-
Transportation and Storage: Prevent impact or dropping during transportation to prevent damage to the components.
-
Store in a dry, non-corrosive environment with the dust cover securely in place.
-
Maintenance: Regularly inspect the probe for damage and seal degradation. Regular calibration is recommended to ensure measurement accuracy.
FAQ
Q: How do I ensure accurate measurement?
A: For best accuracy, ensure sufficient insertion depth and avoid bending the cable. Calibrate the probe periodically based on usage conditions.
Q: How should I maintain the sensor?
A: Regularly check the probe and cable for damage, and keep the sensing area clean. Recalibration is recommended every 6–12 months for critical uses.
Q: Can you customize the sensor for specific applications?
A: Absolutely. We offer customization options including cable length, connector type and sensing element (RTD, thermocouple, or thermistor) to meet your specific needs.
Q: How fast can I get customized solutions?
A: Standard units: 2-4 weeks
Custom projects: 12-week minimum
Q: What logistics method is used?
A: We can select the appropriate logistics method for shipment based on your requirements. Product inspection data, product certificates, and instructions will be included with shipments.
Hot Tags: probe temperature sensor, China probe temperature sensor manufacturers, suppliers, factory, waterproof thermometer, Adjustable Thread Mount Temperature Sensor, thermistor temperature sensor, Automotive Coolant Temperature Sensor, thermal probe sensor, smart thermometer
